How to Fix CCTV Camera Display Flickering Due to Roof Lights

CCTV cameras are essential for security, but sometimes, display flickering or running patches appear, especially under artificial lighting like roof lights. This issue can be frustrating and may compromise video clarity. Fortunately, adjusting a few settings can eliminate flickering and improve display quality.

Causes of CCTV Camera Flickering

Power Frequency Mismatch – The camera’s refresh rate may not be synchronized with the electrical frequency.
LED Roof Lights Interference – Some LED lights operate at frequencies that interfere with the camera’s sensor.
Incompatible Display Settings – Incorrect resolution or frame rate settings may cause flickering.
Low-Quality Power Supply – Power fluctuations can affect the camera’s performance.
Defective Camera or Wiring Issues – Faulty cables or a malfunctioning camera can also lead to flickering.

Solution: Adjusting Display and Power Line Frequency

To fix flickering, follow these simple steps:

1. Change Power Line Frequency to 50Hz

Most countries use either a 50Hz or 60Hz power supply. If your CCTV camera is experiencing flickering, switching to 50Hz may help stabilize the display.

Go to Camera Settings.
Locate the Power Line Frequency (Hertz) Option.
Change it to 50Hz.
Save the settings and restart the camera.

2. Enable the Anti-Flickering Option

Most modern CCTV cameras have an anti-flickering option that helps reduce display issues caused by lighting.

Navigate to Display or Image Settings.
Find Anti-Flicker Mode.
Turn it On or select Auto Mode.
Apply the settings and check if the flickering is resolved.

3. Adjust Display Settings

Sometimes, incorrect display settings can contribute to flickering. Tweaking the frame rate and resolution might help.

Set the Frame Rate to match the power frequency (e.g., 25fps for 50Hz power supply).
Ensure the Resolution is set to the recommended level for your camera model.

Additional Tips to Prevent Flickering

Use high-quality LED lights designed to minimize frequency interference.
Install a stable power supply to avoid fluctuations.
Use shielded cables for better signal transmission.
Regularly update firmware to ensure smooth camera performance.
If the issue persists, consider replacing the camera with a better model.

By making these simple adjustments, you can effectively eliminate flickering and ensure a smooth, clear CCTV display.

Suggested knowledgebase articles: